| Free Crochet Marigold Motif Tablecloth |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Marigold Motif Tablecloth
Materials: Knit Cro Sheen; 8 - 150 yd Balls Yellow, 5 - 225 yd Balls White
Steel Crochet Hook Size 7 or 1.50 mm
Finished Size Approximately 38” Square
Gauge: Each motif = 2 ½” Square.
Motif 1:
With yellow, ch 6 and join with sl st to form a ring.
Rnd 1: Ch 5 for first dc and ch 2, (dc in ring, ch 2) 7 times, join with sl st to 3rd ch of
starting ch-5.
Rnd 2: Sl st in next ch-2, ch 4 for first tr, retaining last loop of each st on hook, work 4 tr in
same space, yo and through all loops on hook (starting cluster completed), ch 5, *
retaining last loop of each st on hook, work 5 tr in next ch-2, yo and through all loops on
hook, work 5 tr in next ch-2, yo and through all loops on hook (cluster completed), ch 5;
repeat from * around, join with sl st in tip of first cluster--8 clusters. Cut yellow.
Rnd 3: Join white in any ch-5 loop, ch 1, sc in same loop, * ch 5, in next loop work dc, ch
5, dc (corner completed) **, ch 5, sc in next loop; repeat from * around, end last repeat at
**, ch 2, dc in first sc--4 corners established.
Rnd 4: Ch 1, sc in same loop, ch 7, sc in next loop, ch 7, * in corner loop work dc, ch 5, dc
(ch 7, sc in next loop) 2 times, ch 7; repeat from * 2 times more, end ch 7, join with sl st to
first sc. Fasten off.
Motif:
Rnds 1 through 3: Make same as motif 1.
Rnd 4: (joining rnd): Ch 1, sc in same loop, ch 7, sc in next loop, ch 7, dc in corner loop,
ch 2, sl st in corresponding corner on motif 1, ch 2, dc in same corner on motif 2, (ch 3, sl
st in next loop on motif 1, ch 3, sc in next loop on motif 2) 2 times, ch 3, sl st in next loop
on motif 1, ch 3, dc in corner loop on motif 2, ch 2, sl st in corner loop on motif 1, ch 2, dc
in same corner on motif 2; complete remainder same as motif 1. Continue making and
joining motifs the same as motif 2 was joined to motif 1 until the piece is 15 motifs by 15
motifs. As required, join one or two sides on each motif; where three or four corners meet,
sl st in previous sl st to join corners.
Border:
Rnd 1: Join white in any corner, ch 8 for first dc and ch 5, dc in same corner, * (ch 8, sc in
next ch-loop) 3 times, ch 8, dc in joining of motifs, skip corner loop after joining; repeat
from * to corner motif, work across motif as before, in corner work dc, ch 5, dc. Continue
around as established, join with sl st to 3rd ch of starting ch-8.
Rnd 2: Sl st to center of corner, ch 8 for first dc and ch 5, dc in same corner, * (ch 8, sc in
next loop) to next corner, ch 8, in corner work dc, ch 5, dc. Continue around as
established, join to 3rd ch of starting ch.
Rnd 3: * Work 8 sc in next ch-5 corner, (10 sc in next ch-8 loop) to next corner; repeat
from * around, join to first sc. Fasten off.
Materials: Knit Cro Sheen; 8 - 150 yd Balls Yellow, 5 - 225 yd Balls White
Steel Crochet Hook Size 7 or 1.50 mm
Finished Size Approximately 38” Square
Gauge: Each motif = 2 ½” Square.
Motif 1:
With yellow, ch 6 and join with sl st to form a ring.
Rnd 1: Ch 5 for first dc and ch 2, (dc in ring, ch 2) 7 times, join with sl st to 3rd ch of
starting ch-5.
Rnd 2: Sl st in next ch-2, ch 4 for first tr, retaining last loop of each st on hook, work 4 tr in
same space, yo and through all loops on hook (starting cluster completed), ch 5, *
retaining last loop of each st on hook, work 5 tr in next ch-2, yo and through all loops on
hook, work 5 tr in next ch-2, yo and through all loops on hook (cluster completed), ch 5;
repeat from * around, join with sl st in tip of first cluster--8 clusters. Cut yellow.
Rnd 3: Join white in any ch-5 loop, ch 1, sc in same loop, * ch 5, in next loop work dc, ch
5, dc (corner completed) **, ch 5, sc in next loop; repeat from * around, end last repeat at
**, ch 2, dc in first sc--4 corners established.
Rnd 4: Ch 1, sc in same loop, ch 7, sc in next loop, ch 7, * in corner loop work dc, ch 5, dc
(ch 7, sc in next loop) 2 times, ch 7; repeat from * 2 times more, end ch 7, join with sl st to
first sc. Fasten off.
Motif:
Rnds 1 through 3: Make same as motif 1.
Rnd 4: (joining rnd): Ch 1, sc in same loop, ch 7, sc in next loop, ch 7, dc in corner loop,
ch 2, sl st in corresponding corner on motif 1, ch 2, dc in same corner on motif 2, (ch 3, sl
st in next loop on motif 1, ch 3, sc in next loop on motif 2) 2 times, ch 3, sl st in next loop
on motif 1, ch 3, dc in corner loop on motif 2, ch 2, sl st in corner loop on motif 1, ch 2, dc
in same corner on motif 2; complete remainder same as motif 1. Continue making and
joining motifs the same as motif 2 was joined to motif 1 until the piece is 15 motifs by 15
motifs. As required, join one or two sides on each motif; where three or four corners meet,
sl st in previous sl st to join corners.
Border:
Rnd 1: Join white in any corner, ch 8 for first dc and ch 5, dc in same corner, * (ch 8, sc in
next ch-loop) 3 times, ch 8, dc in joining of motifs, skip corner loop after joining; repeat
from * to corner motif, work across motif as before, in corner work dc, ch 5, dc. Continue
around as established, join with sl st to 3rd ch of starting ch-8.
Rnd 2: Sl st to center of corner, ch 8 for first dc and ch 5, dc in same corner, * (ch 8, sc in
next loop) to next corner, ch 8, in corner work dc, ch 5, dc. Continue around as
established, join to 3rd ch of starting ch.
Rnd 3: * Work 8 sc in next ch-5 corner, (10 sc in next ch-8 loop) to next corner; repeat
from * around, join to first sc. Fasten off.
| MomsLoveOfCrochet.com Free Crochet Patterns From Me To You |
Custom Search
